Adjusting the seat height
WARNING
A quick release lever that is not fully closed can open while riding allowing the saddle to move. This can lead to severe injury. The
tension on the quick release lever should be strong enough to need two hands when closing.
The saddle can be extended up to the “MINIMUM INSERT” line that is imprinted on the seat post (3).
- Loosen the quick release lever (1), measure the saddle height to the rider’s hip and tighten the clamp to close.
- By adjusting the nut (2) on the quick release lever, the clamping tension can be increased or decreased.
- The quick release lever (1) must close with a noticeable pressure.
Adjusting the saddle
The saddle can also be tilted and adjusted in the longitudinal direction.
- Loosen the screw (4).
- Place the saddle in the desired horizontal position, move it forward or back and tighten the screw (4).
NOTE
In order to avoid seat discomfort, the saddle should be adjusted as close to horizontal as possible.
USE
9
