Magnum 8050, Руководство оператора

Страница: 39 / 54

7-4 Maintenance
7.2 Camera Alignment
Height alignment and stitching
Camera alignment tools: Adjustment Chart, 3C-Kit Screwdriver,
Scanner Maintenance Software
0 The Scanner should be warm. Make sure that the scanner has
been turned on for at least one hour prior to camera alignment.
Slight light intensity changes and camera shifting can occur just
after turning the scanner on and the warm-up time will ensure that
light conditions and camera heights have stabilized.
1 Remove the front streamer. The camera alignment holes are
behind the front streamer. Lift the end and pull the streamer out
along its slot.
2 Locate the adjustment holes. The scanner’s cameras are
labeled, from the scanner’s right edge, with letters A, B, C etc. The
B camera is fixed and serves as the reference point for aligning
the other cameras. You align a camera by turning its adjustment
screw through the hole in front of the camera as described below
in steps 3 to 7.