Magnum 5012MAG-42HM, Инструкция по эксплуатации

Страница: 6 / 15

7
4 Control / Operation
4.1 Connections
4.1.1 Connecting the spray
nozzle to wand
NOTE!
Always remove any dirt from
the nipple before connecting
the
nozzle
to the spray gun.
Insert spray nozzle into wand quick connect.
4.
2
Switching on the cleaner
4.
2
.1 Cold water operation
Before starting up the engine,
you must carefully read through
the instructions for use of the
engine. In the instructions for
use the operation and service of
the engine is described.
When the engine has been
started, the high pressure wash-
er can be used for cleaning with
cold water.
4.
2
.2 Hot water operation
1.
Turn the
burner
switch to the
on position
.
2. Set thermostat to desired
temperature.
3. Unlock the spray handle and
squeeze the trigger.
4.
The oil burner will start.
5.
Release the trigger and lock
the spray handle when not in
use.
4.
3
Using cleaning agents
If you want to use detergents, you
will need an external injector.
Please contact your local
distributor for further information.
CAUTION!
Never allow cleaning agent
to dry on the surface to be
cleaned. The surface may be
damaged.