CONTENTS
ACCESSORIES
•
PCU
Portable configuration unit
•
PCCU
Portable configuration and calibration unit with
Calibrating jigs
•
TIPS
Full range of EW tips for the Soldering iron
PCU Configuration unit
Configuring the PCU
This procedure transfers user data from a PC to the PCU
Equipment required
Personal Computer with Windows 95 or 98, Configuration program on disc, DB-9 Serial
cable, RJ-12 to RJ-12 connector cable and PCU
Procedure
Connect the DB-9 plug to the serial port of the PC and the RJ-12 plug to the PCU
Switch on the PC, load disc and either copy configuration program to desktop or run
program from disc (slower)
Double click icon, select COM port, click ok
The parameter setting screen will appear
If all the buttons excluding the
exit
button are Grey then the
Communication has not been established i.e wrong COM port.
Cable not connected, unit not switched on or battery dead
Clicking on
Get current values from PCCU
displays all parameters previously stored on
the PCU
Clicking on
Restore factory settings
displays all values set at the factory
Modify values in the dialogue boxes by selecting
Range block
The temperature values within which the unit will
function
Lock settings
The temperature and airflow values to be locked
Checking the various functions will enable them
4
NOTE
When the
lock setting
have been checked the values in
the
Range settings
will be ignored
Finally click on the
Store data on PCCU
and wait for the progress bar to stop moving and
the completed block to appear
Reset PCU.
file:///C|/Documents%20and%20Settings/Lauren/...ther%20stuff/magnum/3005%20word%20booklet.htm (7 of 12) [03/03/2003 10:16:31 PM]
