Magnum Industrial MI-91600, Руководство по эксплуатации

Страница: 9 / 27

Quick release / blade tensioning
Lifting the quick release handle to release blade tension.
Remove blade and replace with new one. Turn down
the handle to tighten blade.
Turn the handle clockwise to minor tighten blade
tension and counterclockwise to release blade tension.
A blade under tension may also pull drive wheel out of
alignment. Adjust alignment of drive wheel with
tracking knob.
Adjusting upper blade support
The blade support bearing (A) should be adjusted so
it almost touches the back of the saw blade when the
blade is tracking properly. To adjust, loosen indexable
locking lever (B) and slide bracket in or out until the
adjustment is correct. Tighten lever. The blade guide
bearing (C) should be adjusted so they almost touch
the slide of the blade. The front edge of the guide
bearings must be positioned just behind the “gullets”
of the saw teeth. To adjust, loosen indexable locking
lever (D) and slide bearing assembly in or out until
the adjustment is correct. Tighten lever. Replace blade
guard.
8