Magnum Industrial MI-31170, Руководство по эксплуатации

Страница: 8 / 18

7
ADJUSTMENTS (cont.)
FIG 7
Note: Proper cleaning of tips and cutterhead is critical to achieving a smooth finish. Dirt or
dust trapped between the cutter insert and cutterhead will slightly raise the cutter insert, and
make noticeable marks on your work piece the next time you plane.
THICKNESS SCALE ADJUSTMENT
The thickness scale, located on the right of the planer, shows the thickness of the finished work
piece. To make sure the scale is set properly, run a piece of wood through the planer and measure
the thickness of the wood. If the scale is out of alignment, loosen the two round head screws (A)
holding the scale indicator (B) and adjust the thickness indicator to the correct setting. Make sure to
re-tighten the two screws once the adjustment is complete. SEE FIG 8.
FIG 8