-9-
LUBRICATION GUIDE OF YOUR EDGE
SANDER
Do not operate machine until properly lubricated.
All ball bearings are sealed type and require no
further lubrication.
Apply a drop of light machine oil occasionally on
the hinge of the tension mechanisms as shown
in Fig. 11 (A). Service the machine every 6
weeks.
USE OF CORRECT ABRASIVE BELT CHART
"A"
Use chart "A" for selecting an abrasive belt.
Aluminum oxide is recommended for general use
in the home workshop.
CONNECTION DIAGRAMS
Impulse Contact Control 1 Rotary Speed
Contact your local Dealer for all your sanding supplies We have an outstanding line of Abrasive Belts
for your convenience
