Magnum Industrial MI-16400, Руководство по эксплуатации

Страница: 2 / 9

2
WARNING
For Your Own Safety Read instruction Manual Before Operating Sander.
1. Wear eye protection.
2. Support Workpiece wity backstop or worktable.
1
.
KEEP GUARDS IN PLACE and in working order.
2. REMOVE ADJUSTNG KEYS AND WRENCHES. Form habit of checking to see that keys and adjusting wrenches are removed from tool before turning it on.
3. KEEP WORK AREA CLEAN. Cluttered areas and benches invite accidents.
4. DON’T USE IN DANGEROUS ENVIRONMENT. Don’t use power tool in damp or wet locations, or expose them to rain. Keep work area well lighted.
5. KEEP CHILDREN AWAY ALL vistors should be kept safe distance from work area.
6. MAKE WORKSHOP KID PROOF with padlocks, master switches, or by re moving starter keys.
7. DON’T FORCE TOOL. It will do the job better and safer at the rate for which it was designed.
8. USE RIGHT TOOL. Don’t force tool or attachment to do a job for which it was not designed.
9. WEAR PROPER APPAREL. Wear no loose clothing, gloves, neckties, rings, bracelets, or other jewelry which may get caught in moving parts. Nonslip footwear
is recommended. Wear protective hair covering to contain long hair. Exception: the reference to gloves may be omitted from the instrctions for a grinder.
10. ALWAYS USE SAFETY GLASSES. Also use face or dust mask if cutting operation is dusty. Everyday eyeglasses only have impact resistant lenses, they are
NOT safety glasses.
11. SECURE WORK. Use clamps or a vise to hold work when practical. It’s afer than using your hand and it frees both hands to operate tool.
12. DON’T OVERREACH. Keep prooer footing and balance at all times.
13. MAINTAIN TOOLES WITH CARE. Keep tools sharp and clean for best and safest performance. Follow instructions for lubricating and changing accessories.
14. DISCONNECT TOOLS before servicing changing accessories, such as blades, bits, cutters, and the like.
15. REDUCE THE RISK OF UNINTENTIONAL STARTING. Make sure switch is in off postion before plugging in.
16. USE RECOMMENDED ACCESSORIES. Consult the owner’s manual for recommended accessories. The use of improper accessories may cause risk of injury
to persons.
17. NEVER STAND ON TOOL. Serious injury could occur if the tool is tipped or if the cutting tool is unintentionally contacted.
18. CHECK DAMAGED PARTS. Before further use of the tool, a guard or other part that is damaged should be carefully checked to determine that it will
operate properly and perform its intended function – check for alignment of moving parts, binding of moving parts, breakage of parts, mounting, and any
other conditions that may affect its operation. A guard or other part that is damaged should be properly repaired or replaced.
19. DIRECTION OF FEED. Feed work into a blade or cutter against the direction of rotation of the blade or cutter only.
20. NEVER LEAVE TOOL RUNNING UNATTENDED TURN POWER OFF. Don’t leave tool until it comes to a complete stop.
A.GROUNDING INSTRUCTIONS
1.
All grounded, cord-connected tools: in the event of a malfunction or breakdown, grounding provides a path of least resistance for electric current to reduce the
risk of electric shock. This tool is equipped with an electric cord having an equipment. grounding conductor and a grounding plug. The plug must be plugged
into a matching outlet that is properly installed and grounded in accordance with all local codes and ordinances.
Do not modify the plug provided - if it will not fit the outlet,have the proper outlet installed by a qualified electrician.improper connection of the equipment
grounding conductor can result in a risk of electric shock.The conductor with insulation having an outer surface that is green with or without yellow stripes is the
equipment-grounding conductor. If repair or repalacement of the electric cold or plug is necessary, do not connect the equipment-grounding conductor to a live
terminal.
Check-with a qualified electrician or service personnel if the grounding instructions are not completely understood or if in doubtas to whether ther tool is
properly grounded. Use only 3-wire extersion cords that have 3-prong grounding plugs and 3-pole receptacles that accept the tool’s plug. Repair or replace
damage or worn cord immediately.
2. Grounded, cord-connected tools intended for use on a supply circuit having a nominal rating less than 150 volts.
This tool is intended for use on a circuit that has an outlet that looks like the one illustrated in Sketch A in Figure the tool has a grounding plug that looks like
the plug illustrated in Sketch A in Figure
A temporary adapter, which looks like the adapter illustrated in Sketches B and C, may be used to connect this plug to a 2-pole receptable as shown in Sketch
B if a properly grounded outlet is not available. The temporary adapter shoule be use only until a properly grounded outlet can be installed by a qualified
electrician. The green-colored rigid ear, plug, and the like extending from the adapter must be connected to a permanent ground such as a properly grounded
outlet box.
3. Grounded, cord-connected tools intended for use on a supply circuit having a nominal rating between 150-250 volts, inclusive:
This tool is intended for use on a circuit that has an outlet that looks like the one illustrated in Sketch D in Figure. The tool has a grounding plug that looks like
the plug illustrated in Sketch D in Figure
Make sure the tool is connected to an outlet having the same configuration as the plug. No adapter is available or should be used with this tool. If the tool must