background image

Ó

 

2 0 0 3   -   Ma gnum   E nergy ,   I nc.

2 9

3 .   O P E R A T I O N

1 .   O p e r a t in g   t h e   I n v e r t e r

T he  R D  S eries   inverter/ cha rger  ha s   two  m odes   of  opera tion:   I NV E R T E R   ( prov iding

power  to  y our  a pplia nces   from   the  ba tteries )   a nd  AC   ( running  from   s hore  power  or  a
genera tor) .   W henever  the  inv erter  is   in  AC   m ode,   it  pa s s es   power  directly   to  y our
a pplia nces   a s   well  a s   recha rges   the  ba tteries   us ing  a   3 - s ta ge  ba ttery   cha rger  ( B ulk ,
Abs orption  a nd  Floa t) .     T his   a pproa ch  to  ba ttery   cha rging  prov ides   ra pid  a nd  com -
plete  cha rging  cy cles   without  pla cing  undue  s tres s   on  the  ba tteries .     I nverter  opera -
tion  is   fully   a utom a tic.

S e a r c h

W ith  s ea rch  m ode  ena bled,   the  inv erter  puls es   the  AC   output  look ing  for  a n

electrica l  a pplia nce  ( ty pica lly   5   to  1 0 0   wa tts ,   depending  upon  the  s etting  y ou’ve
s elected) .     W henever  there  is   no  loa d  detected,   the  inverter  a utom a tica lly   goes   into
s ea rch  m ode  ( s leep)   to  m inim ize  energy   cons um ption.     During  this   tim e,   the
inverter ’s   green  LE D  fla s hes   ( fa s t)   to  indica te  S E AR C H  m ode.   W hen  a n  a pplia nce  is
s witched  on  ins ide  the  coa ch,   the  inverter  recognizes   the  need  for  power  a nd  a uto-
m a tica lly   s ta rts   the  inv erter

I n v e r t e r   M o d e
W henever  AC   S hore  Power  is   no  longer  s ens ed,   the  inv erter  a utom a tica lly   tra ns fers
to  ba ttery   power  with  no  interruption  to  y our  a pplia nces .     T he  inv erter ’s   green  LE D
fla s hes   once  every   2   s econds   ( m edium   fla s h)   to  indica te  it  is   running  on  ba ttery
power  a nd  prov iding  AC   to  the  coa ch.

A C   S h o r e   P o w e r   M o d e

W henever  AC   S hore  Power  is   s ens ed,   the  inv erter  a utom a tica lly   tra ns fers   to  the

s hore  power  with  m inim a l  interruption  to  y our  a pplia nces .

B u lk   C h a r g e   M o d e

W henever  the  inv erter  is   running  on  nom ina l  AC   S hore  Power,   it  cha rges   the

ba tteries .   T he  inverter ’s   green  LE D  s ta y s   ON  ( s olid)   to  indica te  the  firs t  s ta ge  of
cha rging.     During  bulk   cha rging,   the  cha rger  s upplies   the  m a x im um   a m ount  of  con-
s ta nt  current  to  the  ba tteries .   As   the  ba ttery   volta ge  ris es   to  a   s et  va lue  ( ty pica lly
2 8 . 2   V DC   for  G E L,   2 8 . 6   V DC   for  AG M,   a nd  2 9 . 2   V DC   for  liquid  lea d  a cid) ,   the  cha rger
will  then  s witch  to  the  nex t  cha rging  m ode.

A b s o r p t io n   C h a r g e   M o d e

As   the  inverter  continues   to  run  on  nom ina l  AC   S hore  Power,   a nd  the  ba tteries

ha ve  been  s ucces s fully   bulk   cha rged,   the  cha rger  enters   its   s econd  s ta ge  of  cha rging.
T he  inverter ’s   green  LE D  fla s hes   once  ev ery   s econd  ( fa s t  fla s h)   to  indica te  a bs orption
cha rging  for  1   -   3   hours   depending  upon  ba ttery   ba nk   s election  ( refer  to  the  ME
S eries   R em ote  m a nua l) .     T he  cha rger  then  s witches   to  its   fina l  cha rging  m ode.

F lo a t   C h a r g e   M o d e

As   AC   s hore  power  continues ,   the  inv erter ’s   green  LE D  fla s hes   once  every   8

s econds   ( s low  fla s h)   to  indica te  the  third  a nd  fina l  s ta ge  of  cha rging.     T he  ba tteries
a re  held  a t  the  floa t  v olta ge  ( ty pica lly   1 3 . 6   V DC   for  G E L,   2 6 . 2   V DC   for  AG M,   a nd  1 3 . 4
V DC   for  liquid  lea d  a cid)   a s   long  a s   AC   is   pres ent  a t  the  inverter ’s   input.     Floa t  cha rg-
ing  reduces   ba ttery   ga s s ing,   m inim izes   wa tering  requirem ents   ( for  flooded  ba tteries )
a nd  ens ures   the  ba tteries   a re  m a inta ined  a t  optim um   ca pa city.

B a t t e r y   S a v e r

T M

  M o d e

Des igned  to  k eep  ba tteries   fully   cha rged  over  long  periods   ( s tora ge)   without

dry ing  them   out.     W henever  the  cha rger  is   in  floa t  for  4   hours   with  no  DC   loa ds
running,   the  cha rger  will  turn  OFF.     I f  the  ba ttery   volta ge  drops   below  2 5 . 0   V DC ,   the
cha rger  will  a utom a tica lly   initia te  floa t  m ode  to  return  them   to  a   full  cha rge.

Содержание RD1824













































Отзывы: