USER MANUAL
C
FLEX
TM
PROGRAMMING
TOOL
Page 3
Standalone Operation - How to Use the Programming Tool
Reading Parameters
Press the “
Read
” button to read out current/voltage value in the driver and display.
When reading the LED driver has failed, the screen digits will show “
E-02
” or “
E-03
”
error code. After a successful reading, the Controller will beep and show “
R-I
”/”
R-V
”
and the readout value in alternative cycling.
Error Code Messages
The message code shown on the LED digits demonstrates some error
message and other operating status information for users to make a proper
decision:
→
E-01
: Connection & communication failed
→
E-02
: Read LED driver parameter failed
→
E-03
: Write LED driver parameter failed
→
CHEK
: Check driver working status or connection status
Most errors can be corrected by disconnecting the Programming Tool from power,
checking all the connections, and then reapplying power.
Beep Sound Message
The sound message from the beeper demonstrates working mode switching or an
operation result:
→
Mode Switching
: on entering SIMPLEMODE, short beep twice.
→
Operation Success
: on PROG or READ success, beep one time.
→
Operation Failed
: on PROG or READfailure, short beep 3 times.
