10
User Manual 79 44 269 | MagniLink Vision BASIC
Installation
Place the unit on a table. The MagniLink Vision should be placed at least
10 cm/3.9 inches from the edge of the table. Note that the system’s
reading table can be moved up to 30 cm/11.8 inches in three directions.
MagniLink Vision is very light, which means that it is important to place
the system correctly to ensure that it always remains stable, especially if
the reading table is in its most extended position. An overload in this
position may cause the system to turn over.
Connect the mains cord to the wall socket and press Power On. The unit
is now ready to be used. The screen can be tilted 10 degrees and
lowered 8,5 cm/3.4 inches from the highest position. Place your hands on
the soft touch padding on both sides of the screen and adjust it to the
desired position. Release the brakes on the reading table; you are now
ready to start using the MagniLink Vision.
Writing position
Place the reading table in the desired position. Lock the table by
pushing the side way brake to the right end position and the depth way
brake to the far end position (towards the back).
Transport position
Place the table in the middle position and push it back as far as possible.
Lock the table by pushing the side way brake to the right end position
and the depth way brake towards the back.
