About this Document
● Storage and transport
6
CONTOUR Operating Instructions © 2013 Magnetrol International all rights reserved
General safety instructions
The CONTOUR is a high-tech device requiring strict observance of standard regulations
and guidelines. The user must strictly follow the safety instructions in this operating
manual. Local and national electrical codes and all common safety regulations and
accident prevention rules should be considered during installation as well.
CE conformity
The CONTOUR conforms to CE's EMC and NSR standards. CE conformity is as follows:
EMC
EN 61326-1: 2006
CISPR 11: 2003 Class A
IEC 61000-4-2: 2001 Air Discharge, 8kV
IEC 61000-4-3: 2002 80-1000MHz, 1V/m; 1.4-2GHz, 1V.m;
2.0-2.7GHz, 1V/m
IEC 61000-4-4: 2004 Power Lines: 1kV; Signal Lines: 0.5kV
IEC 61000-4-6: 2004 0.15-80MHz 1VRMS, 80% A.M. by
1kHz Power & Signal Lines
NSR
(73/23/EWG)
EN 61010-1: 2001
FCC conformity (EMC)
FCC Part 15, Sub-part B, Class A.
Safety information for Ex Areas
EX-AREAS:
Please note the Ex-specific safety information for installation and
operation in Ex areas. These safety instructions are part of the operating
instructions manual that comes with Ex-approved scanners.
WARNING
: Substitution of components may impair Intrinsic Safety.
WARNING
: For preventing ignition of flammable or combustible atmospheres,
read, understand and adhere to the manufacturer
’
s live maintenance procedures.
1.3
Storage and transport
The scanner is protected by special packaging during transport, and is guaranteed to
handle normal loads during transport.
