Magnetic mTripod, Руководство пользователя

Страница: 12 / 92

12
Control unit MGC mTripod
Digital inputs, digital outputs and relay outputs
Input function Descriptions
Random check
function
Activate random check function, confirm hits
As soon as +24 V DC are applied to this input, the random check function is
activated.
If a hit is generated, the hit can be confirmed with a 0 V pulse via this input.
" Random check function " menu:
ä
Page 51, chapter 6.2.7.
For this input to be effective, you must select the option "Counting" or
"Random" for the parameter "Mode" in the "Random check function" menu.
Multi valid left Multi validation for a passage from left
Function when multiple signals are required to trigger a validation for a
passage from left.
A validation is triggered when a pulse is pending at all inputs with the
function "Multi valid left". Pulses are deleted after 10 seconds.
Example: Passage will not be granted until a face mask has been identified
and the hands have been disinfected. In the example, you must parameterise
two inputs with the function "Multi valid left".
Multi valid right Multi validation for a passage from right
Function when multiple signals are required to trigger a validation for a
passage from right.
A validation is triggered when a pulse is pending at all inputs with the
function "Multi valid right". Pulses are deleted after 10 seconds.
Example: Passage will not be granted until a face mask has been identified
and the hands have been disinfected. In the example, you must parameterise
two inputs with the function "Multi valid right".
Illumination off Switching the illumination off and on
As soon as +24 V DC are applied to this input, the outputs of the MFM01
plug-in module for floor illumination and frame illumination are switched off.
If no voltage is applied at this input, the floor illumination and frame
illumination are switched on.
| End switch drop
arm
End switch drop arm released (only with "Drop arm" option) (Fail Safe)
This input is used internally for the feedback signal of the energized drop-
arm holding magnet. As soon as the feedback signal is missing, an error is
generated.
Table 4: Function digital inputs