Full Height Turnstile MPT-152
Assembly and installation
38
5.4.7 Mounting
centering
bolts, locking discs and lock unit
Mount the centering bolts, the lock plates and lock units (optional)
in the reverse order to dismounting. See Page 32 etc., chapter 0, 0
and 5.4.5.
Fig. 24: Mounting the lock
1. Mount the 4 centering bolts for the two drive units.
2. Mount the left and right locking plate for the two drive units.
The groove must be facing the full height turnstile!
3. Mount the 2 fixing screws for the two drive units.
4. Mount two lock units (optional).
5.4.8
Fixing the center columns to the floor bearing
How to fix a centre column to a floor bearing is described below.
The second center column is fixed in exactly the same way as the
first center column.
Fig. 25: Fixing the center column
1. Fix the centre column to the floor bearing using 3 threaded
pins.
2. Tighten all 3 threaded pins so that the centre column can be
moved easily in both rotating directions.
3. Secure threaded pins using Loctite 241 or similar.
