1
.
A
red ligh
t
indicates a 50% or less charge and you should
immediately recharge the Memory Saver.
2.
A
yellow light
indicates a 50% to 75% charge. The Memory Saver may be used but
should be recharged as soon as possible.
3
.
A
green light
indicates the internal battery is fully charged.
CHARGING THE INTERNAL BATTERY USING AC/DC CHARGER
1.
Stop the attempt to remove vehicle’s battery and disconnect MS-7 from the vehicle.
2.
Plug the AC/DC adaptor charger into a grounded 120V or 220V AC wall outlet.
3.
Plug the AC/DC adaptor charger’s small plug into the charge input of MS-7.
4.
The CHARGING
(RED
) LED
will glow indicating charging.
5.
The CHARGED
(GREEN)
LED
will light when the battery has reached full charge.
6.
Please replace the internal battery of MS-7 when the DEFECTIVE BATTERY
(YELLOW)
LED
lights.
7.
If the charging
(RED)
LED
still lightens
after 24 hours
charging, please replace the
internal battery due to the age and condition.
WARNING
- Please don’t use the male-to-male cigarette plug cable to charge the internal
battery of MS-7 while driving because the unstable charging current will damage the fuse of
cigarette plug or MS-7.
WARNING
- Please don’t charge the internal battery when the LED of the CHARGING
(RED)
or the CHARGED
(GREEN)
still lightens because the maintain mode
can be overridden and the internal battery can be overcharged.
