TECHNICAL DATA SHEET
TECHNICAL SPECIFICATIONS
HYBRID STARTER
Operating voltage
12 V
Start-up current
4500 A
Life span (*)
1,000,000 cycles
The first charging, AC adapter supplied
30 min
Charging time, AC adapter supplied
5 min
Fast charging (*)
15 - 60 seconds
Automatic
charger
Charging voltage
230 V AC
Charging power
12 V - 1.5 Ah
Max. charging voltage
14.9 V
Overvoltage
protection
Clamps
insulated
Cable diameter
25 mm2 Length 45 cm
Weight
4.5 kg
Dimensions:
H31 cm x L27.5 cm x P13.5 cm
Recommended use
Light commercial vehicles
Average use in vehicles with a battery
0-140 Ah
Operating temperature
-40°C / +70°C
Impact protection housing
PPL
(*) Calculated for 50%.discharge rate.
(**) Connect directly to a charged battery of a running vehicle and / or to a 30 A workshop battery charger.
HYBRID STARTER battery produces inrush current during the first seconds of the initial starting. Charging control button
with illuminated indicators enables checking the internal charge status. To perform a full check, press the "TEST" button
for 10 seconds (5 LEDS LIGHTED = FULL CHARGE).
Active safety
1.
Type C clamps, both positive and negative, are mounted in appropriate seats (patented) equipped with copper
cable grip and rubber covering, which guarantee maximum safety.
2.
The guide grooves block the cables preventing dangerous overhangs and cable soiling.
3.
HYBRID STARTER with its dry battery is protected against electrolyte leakage. It can be stored and / or used in
any position.
