Magnetek Intelli-Protect NFZ-CONFIG-5050, Руководство пользователя

Страница: 16 / 65

Intelli-Protect User Manual
April 2023
Page 16 of 65
2.4 50 m Laser Installation and Wiring
The Intelli-Protect
®
50 m System measures the distance between the trolley or bridge mounted laser lens
and the target reflector. There must be no projections on the crane that may extend in front of either (or
both) the laser unit or the reflector.
Make sure the laser is mounted such that nothing can come between the laser's view of the reflector.
Determine the mounting position for the laser and the target such that the center of the laser's faceplate and
the center of the reflector are the same distance above the plane the crane rails are in. The laser and
reflector center point should also be the same distance from the rails. This is the most important part of a
successful installation since the laser beam must stay on the reflector at all range points anywhere in the bay.
Figure 2-3: Installing the Laser
CAUTION
Intelli-Protect
®
50 m Configurable systems contain Class 1 lasers with a 660 Nm wavelength. Although
the laser is eye-safe, it is recommended that no one look directly into the laser with their eye close to the
lens of the laser unit. Do not open the laser unit to service it since there are no serviceable parts inside.