Magnetek IMPULSE G+ Mini, Техническое руководство

Страница: 86 / 182

IMPULSE
®
•G+ Mini Technical Manual
November 2020
Page 86
Table 5-2: DC Bus Regulation
Table 5-3: V/f Parameters
VFD Voltage E01.01 Setting
Overvoltage Trip Braking Transistor
Trip Reset On Off
230 150-255 400V 380V 380V 375V
460 ≥ 400 800V 760V 760V 750V
460 <400 720V 680V 660V 650V
Parameter Name Function Range Default
E01.03 V/f Pattern V/f Pattern Selection 00–0F, FF 04*
0 60Hz, Level 0
1 60Hz, Level 1
2 60Hz, Level 2
3 60Hz, Level 3
4 60Hz, Level 4
5 60Hz, Level 5
6 60Hz, Level 6
7 60Hz, Level 7
8 60Hz, Level 8
9 50Hz, Level 0
A 50Hz, Level 2
B 50Hz, Level 4
C 50Hz, Level 6
D 75Hz, Level 4
E 90Hz, Level 4
F Custom
FF Custom w/o Limit
E01.04*** Max Frequency Maximum Frequency 20.0–150.0 Hz **
E01.05 Max Voltage Maximum Voltage 0.0–510.0 V **
E01.06 Base Frequency Motor Base Frequency 0.0–150.0 Hz **
E01.07 Mid Frequency A Midpoint Output
Frequency A 0.0–150.0 Hz **
E01.08 Mid Voltage A Midpoint Frequency
Voltage A 0.0–510.0 V **
E01.09 Min Frequency Minimum Frequency 0.0–150.0 Hz **
E01.10 Min Voltage Minimum Voltage 0.0–510.0 V **
E01.11 Mid Frequency B Midpoint Output Frequency B 0.0–150.0 Hz 0.0
E01.12 Mid Voltage B Midpoint Output
Voltage B 0.0–510.0 V 0.0
E01.13 Base Voltage Motor Base Voltage 0.0–510.0 V 0.0
* Initial value determined by X-Press Programming
** Initial value determined by voltage class and setting of E01.03.
See Table 5-4 on page 87 and Table 5-5 on page 87 .
*** To change E01.04 “Max Frequency,” E01.03 must first be set to “0F”, or pick a V/f pattern from Table 5-4 on page 87 or
Table 5-5 on page 87 .