IMPULSE
®
•G+ Mini Technical Manual
November 2020
Page 37
4.2.3 Quick Start Guide Information
Basic programming of the VFD consists of entering motor parameters, choosing a motion, and selecting a speed
reference.
After applying power to the VFD, the display will show the output frequency of 0.00.
Navigation Keys:
The above figure shows the keypad on the G+ Mini. These keys are used for navigation and for changing various
settings within the VFD.
Use the
and
keys to change the display and/or change the value of a parameter.
Use the
key to move the cursor to the right and to reset the VFD after a fault.
Use the
key to view and save any parameter changes or the
key to exit without saving changes.
Setting Motion:
From the output frequency display, press the
key five times until the display shows the parameter menu
(PAr).
Press
. The display will show A01.01.
Press
two times to move the blinking digit to the right.
Press
until the parameter A01.03 (Motion) appears.
Press .
Содержание IMPULSE G+ Mini
