Magnetek 188-10130, Инструкция по эксплуатации

Страница: 25 / 67

RVS-DX, Digital Soft Starter Instruction Manual—04/01/04
4-5
LCD Display
The LCD display consists of two lines of alphanumeric characters, displaying: system parameters
starter settings, motor current, fault indication and statistical data. The LCD can be displayed in four
different languages: English, French, German and Spanish. The first line displays the function and
the second line displays the setting (or measure value). Upon initiation of the starter the LCD will
display the operating current as a percentage of motor FLA.
By pressing the “Mode Key” you can scan through all of the modes.
Stop at the required mode and press the “Select” button to review each parameter (function of the
mode.)
When you have reached the required parameter, modify its value with up arrow and down arrow
buttons.
To store the new parameters press the “Select” button until the “STORE ENABLE” message is
displayed on the LCD, and then press the “Store” button. When new parameter data has been
successfully saved, the LCD will read “DATA SAVED OK”.
% Of Motor FLA
Main Parameters
Start Parameters
Stop Parameters
Dual Adjustment
Parameters
Special Features
Parameters
Fault Parameters
I/O Programming
Parameters
Comm. Parameters
Statistical Data
****
These modes are “skipped” when
Display Mode Parameter is set to
“minimized”.