HPV1000-App_Note_09
Keypad Navigation Guide
Accessing and adjusting parameters using the keypad supplied with the HPV1000 can be achieved in three
steps:-
Step 1
– Finding the menu required
Regardless of which parameter you are viewing, hitting the button twice will always bring you back to the
‘MENU’ level.
From there either use the UP - or DOWN - keys to access the required menu within that group
or use the LEFT- or RIGHT- keys to jump across to a menu within another group.
Step 2
– Finding the parameter required within that menu
When you have found the menu you require, press the button and access the parameter list for that
particular menu. Use the UP- or DOWN - keys to find the parameter required.
Step 3
– Making changes to a parameter
When you have found the parameter you require, press the button. You will now see a cursor
underlining the digit on the far right hand side as shown Use the LEFT - or RIGHT- buttons to
select the digit you need to change. Then use the UP - or DOWN - buttons to change the value.
Press the button to save the new value.
Menu Layout:
ESC
ENTER
ENTER
Ready/Run
ESC
ENTER
