Refer to this Supplement together with the Installation Manual and Instruction Manual.
Diff erences from Installation Manual and Instruction Manual
Accessories
(Addition) Rubber bushing: 2, M4 nuts: 2
Slider side surface
See the description below.
2
(E)
Slider installation procedure
Th
e slider can be mounted using one of the three methods
below.
Pattern 1
Pattern 2
Pattern 3
Installing the rubber bushing on the M4 nut enables
installation without the nut falling off .
Note
Because the nut position is limited by the rubber bushing,
pay careful attention to the tolerance of the slider mounting
holes.
M4 × 20
M4 tap
M4 × 20
M4 tap
M4 × 20
M4 nut
(opposite side:
8 mm)
M4 × 20
M4 nut
(opposite side:
8 mm)
M4 × 20
M4 nut
(opposite side:
7 mm)
Rubber bushing
M4 × 20
M4 nut
(opposite side:
7 mm)
Rubber bushing
