MAGNAWELD RS 200 MK, Руководство пользователя, Страница: 17 / 156

17 RS 200 MK - RS 250 MK - RS 300 MK - RS 350 MK - RS 400 MK
EN
www.magmaweld.com USER MANUAL
2.3 Mains Plug Connection
For your safety, never use the mains cord of the machine without a plug.
• No plug has been connected to the mains cable since there may different types of outlets available in plants,
construction sites and workshops. A suitable plug must be connected by a qualified technican. Make sure that
the grounding cable marked with and a yellow / green color is present.
• After connecting the plug to the cable, do not attach it to the outlet at this stage.
• If you will use the gas cylinder on the gas cylinder transport platform on the machine, place the gas cylinder
here and secure it with a chain.
• If you will not place the gas cylinder on the machine, secure the gas cylinder to the wall with a chain.
• Use safety regulators and heaters according to the standards for work safely to achieve the best results.
• Make sure the size of the hose connection of the gas regulator you are using is 3/8” (9.5mm).
• Open the gas cylinder valve keeping your head and face away from the outlet of the valve and keep it open for
5 seconds. By this means, possible sediment and impurities will be discharged.
2.4 Welding Connections
Figure 2 : Grounding Pliers Connections
• Grounding cable sockets with different inductance values
allow welding with lower spatter in a wide current range.
Socket for low current and small wire diameters socket,
for high current and large wire diameters or
socket should be preferred.
• Connect the grounding pliers wire to one of the grounding wire
sockets on the machine and tighten by turning it to the right.
• To improve the welding quality, firmly connect the grounding
pliers to the workpiece as close as possible to the welding area.
2.4.1 Grounding Pliers Connections
2.4.2 Gas Connections
Figure 3 : Gas Cylinder - Heater - Regulator Connections
Installation
1-
Gas Cylinder Valve
6-
Gas Regulator
2-
Gas Cylinder
7-
Manometer
3-
CO 2 Heater
8-
Flowmeter
4-
Chain
9-
Flow Adjustment Valve
5-
CO 2 Heater Energy Cable
10-
Gas Hose
1
2
5
4
3
6
7 8
9
10