20
EN
Advanced Operation
Adjusting Antenna
You can verify the signal strength of each channel.
1 Select a channel to adjust using [the
Number buttons] or [CH
K
/
L
].
2 Press
[SETUP].
3 Select “CHANNEL” using [
K
/
L
],
then press [OK].
4 Select “ANTENNA” using [
K
/
L
],
then press [OK].
CHANNEL
EXIT
CHANNEL
TIME
DETAIL
INITIAL
ADD/DELETE
ANTENNA
AUTOSCAN
STB starts receiving the signal for the
channel.
5 By referring to the on-screen
indication, adjust the antenna’s
direction to get the best reception.
WEAK
STRONG
NOW
10
PEAK
50
ANTENNA
EXIT
CHANNEL
TIME
DETAIL
INITIAL
10.1
BACK
Status bar:
Stretches to the right as the signal
strength gets stronger.
Peak indicator:
Indicates the highest strength ever
reached.
To adjust other channels:
Select the channel using [CH
K
/
L
], then adjust it.
6 Press [SETUP] to exit.
•
Selecting Display Mode
You can adjust the aspect ratio of the digital TV
program to fi t your 4:3 TV monitor.
Display Mode
1 Press
[SETUP].
2 Select “DETAIL” using [
K
/
L
], then
press [OK].
SETUP
EXIT
CHANNEL
TIME
DETAIL
INITIAL
CLOSED CAPTION
DISPLAY MODE
AUTO POWER DOWN
V-CHIP
4 HOURS
LETTERBOX
3 Select “DISPLAY MODE” using [
K
/
L
],
then press [OK].
DETAIL
EXIT
CHANNEL
TIME
DETAIL
INITIAL
CLOSED CAPTION
DISPLAY MODE
AUTO POWER DOWN
4 HOURS
LETTERBOX
V-CHIP
4 Select the desired display mode
using [
K
/
L
], then press [OK].
*
Descriptions of each settings are explained
in the “Information on Display Mode” on the
next page.
Select display mode.
ZOOM
FULL
LETTERBOX
5 Press [SETUP] to exit.
X6045UD_TB100MW9.indd 20
X6045UD_TB100MW9.indd 20
2008/05/16 14:48:25
2008/05/16 14:48:25
