background image

5

6

Dehumidifying mode(only on 

some models)

    In the Dehumidifying  mode, you cannot switch the  

    fan speed. It is automatically controlled in this mode.

NOTE

Ensure the unit is plugged in and power is 

available. 

1. Press the 

ON/OFF

button to start the air 

    conditioner.

2. Press the 

MODE

 button to select Dry.

3. Press  the 

TEMP

 

UP/DOWN

 button to 

    set the desired temperature. The temp-

    erature can be set within a range of 

o

O

o

O

o

O

    17 C/62 F~ 30 C/86 F in 1 C/1 F 

    increments.

Cooling/Fan mode

Ensure the unit is plugged in and power is 

available. 

1. Press the 

ON/OFF 

button to start the air 

    conditioner. 

2. Press the 

MODE 

button to select Cool, or

3. Press the 

TEMP UP/DOWN 

button to set the 

    desired temperature. The temperature can 

o

O

    be set within a range of 17 C/62 F~ 

o

O

o

O

    30 C/86 F in 1 C/1 F increments.

4. Press the 

FAN 

button to select the fan 

    speed in  four steps- Auto,Low, Med,or High. 

 mode.

Fan

   In the Fan mode, the setting temperature is not 

   displayed in the remote control and you are not 

   able to control the room temperature either. In this 

   case, only step 1, 2 and 4 may be performed.

NOTE

How to use the buttons

Auto mode

Ensure the unit is plugged in and power is 

available. 

1. Press the 

ON/OFF

button to start the air 

    conditioner.

2. Press the 

MODE

 button to select Auto.

3. Press  the 

TEMP

 

UP/DOWN

 button to set  

    the desired temperature. The temperature 

o

O

    can be set within a range of 17 C/62 F~ 

o

O

o

O

    30 C/86 F in 1 C/1 F increments.

3

4

2

1. In Auto mode, the air conditioner will automatically 

    select the Cooling or Fan mode depending on the 

    difference between the actual room temperature 

    and the desired set temperature on the remote 

    control.
2. In Auto mode, the fan speed is controlled 

    automatically.

3. If the Auto mode is not comfortable for you , the 

    desired mode can be selected manually.

NOTE

1

3

1

Sleep mode

Press this button to activate the Sleep 

mode. This function is available on COOL

 or AUTO mode only and maintain the 

most comfortable temperature for you.

In this mode the selected temperature will 

O

O

increase by 1 C/2 F 30 minutes after the 

mode is selected. The temperature will 

O

O

then increase by another 1 C/2 F after an 

additional 30 minutes. This new temperature 

will be maintained for 6 hours before it 

returns to the originally selected temperature. 

This ends the Sleep mode and the unit will 

continue to operate as originally programmed. 

The Sleep mode program can be cancelled 

when press the MODE, ON/OFF, FAN SPEED

and SLEEP button during operation.

3

2

1

3

3

2

1

3

Содержание RG15AE







Отзывы: