Magnavox MX2000, Руководство пользователя, Страница: 13 / 30

Setting Up a Motion Detector (continued)
Program the Motion Detector.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
a. Open the door on the Central Controller.
Slide the Slider Switch to INSTALL SEC.
c. Use a ball-point pen to press the CODE button on
the back of the Motion Detector. This will assign a
random security zone code for your Motion
Detector. This code allows the Central Controller
to differentiate the Motion Detector from additional
Motion Detectors you may purchase later.
d. Press the TEST button on the back of the Motion
Detector until the Central Controller beeps.
A Zone Indicator Light will appear on the Central
Controller near a number on the inside door. That
means the Motion Detector you just installed has
been designated as that particular zone by your Home
Security System. (For example, if a Zone Indicator
Light appears by the number on the inside of the
Central Controller’s door, the Motion Detector has
been installed as zone 4.) If you wish, you may write
the name or location of this Motion Detector by the
number on the door of the Central Controller.
e. Slide the switch on the back of the Motion Detector
to or 2. If you select the system’s alarm will
sound immediately when the Motion Detector
detects movement. If you select 2, when the Motion
Detector detects movement, it will wait a few sec-
onds and try to sense additional movement.
If
it
detects movement a second time, it will sound the
system’s alarm.
Central Controller
Slider Switch to
INSTALL SEC
Door
(write name
of zone here,
SMARTHOME.COM™
1-800-SMART-HOME
949-221-9200
http://www.smarthome.com
Order #7308KIT