Magnavox MTFT713, Руководство пользователя, Страница: 19 / 24

SYSTEM SETUP
- - General Setup Page - -
Go To General Setup Page
TV Shape Lb
Angle Mark On
OSD Lang Eng
Screen Saver On
Setting Menus:
In General Setup Page:
In Dolby Setup Page:
In Page:
◄ , ► , ▲ , ▼
In stop playback mode, press the SETUP Button. The setting menu will appear on the screen as below,
press the Direction Buttons to select and highlight the function you need to set or reset.
SETUP Button to save the settings and exit.
Press the OK Button on the Remote Control or the ENTER Button on the unit to enter or confirm the
selection. After setting, press the
the multi-angle logo
or the image is paused for approximately
five minutes.
On or Off. If set to On,
when multi-angles are available in the playing DVD,
Direction and ENTER/OK
Buttons to set the
Off. If set to
On, the screen saver will come on when the unit stops
it On or
5. If Last Memory is selected, using the Direction and ENTER/OK Buttons to set it On or Off. If set to
On, the unit will start playback from the position where the disc was stopped last time.
2. If Angle Mark is selected, using the Direction and ENTER/OK Buttons to set it
(On Screen Display Language) is selected, using the 3.
4. If Screen Saver is selected, using the Direction and Buttons to set
1. If TV Shape is selected, use the Direction and ENTER/OK Buttons to set the aspect ratio to match
the playing movie.
If OSD Lang
OSD language as desired.
ENTER/OK
Speak er
will appear on the
screen.
to
1. If Downmix is selected, using the Direction and Button set it
~ If set to Lt/Rt, the rear left or rear right channels will play on both Left and Right Speakers.
Lt/Rt; Stereo.
~ If set to Stereo, the rear left channel will play on left Left Speaker; the rear right channel will play
on Right Speaker.
ENTER/OK
to
channel on all speakers) or Mix-Mono
to Stereo, L-Mono
(Play Left channel on all speakers), R-Mono (Play Right
(Mixed Right and
1. If Dual Mono is selected, use the Direction and Buttons to set it
2. If Dynamic is selected, use the Direction and ENTER/OK Buttons to set the dynamic level as
desired or turn it off.
ENTER/OK
Left channel then plays on all speakers) as desired.(Functions depend on the
recording of the disc).
Setup
If Speaker Setup is selected, press the ENTER/OK Button, the sub-setting menu will appear.
Last Memory Off
18