- 4 -
S
ETTING
U
P AND
U
SING
Y
OUR
TV
Press the POWER
button to turn ON the TV.
Be sure to connect the TV
power cord to a standard
AC outlet first.
Press the VOLUME
▲
/
▼
buttons to adjust
the sound level.
Press the CHAN-
NEL
▲
/
▼
buttons to
select available TV chan-
nels. (See Auto Install above.)
T
ELEVISION
The current
channel number
will appear briefly
when the TV is first
turned ON and with
channel changes. To
display the channel
number for five
seconds, press the
STATUS/EXIT
button.
You can turn on the
TV by pressing the
CHANNEL
▲
/
▼
buttons on the front
of the TV. The
CH(annel)
▲
/
▼
but-
tons of the remote
control will not turn
on the TV power.
S
MART
H
ELP
A
UTO
I
NSTALL
R
EMOTE
T
o load the batteries into the
remote:
1. Press in the tab on the
battery compartment
lid on the bottom of the
remote control, then lift
off the lid.
2. Insert two AA batter-
ies (supplied) into the
battery compartment
as indicated inside the
compartment. Installing
batteries incorrectly may
damage the remote
control.
3. Replace the lid.
Point the remote control
toward the remote sensor on the TV
when operating the TV with the remote.
(See Television illustration below.)
MENU Button
Press to access or remove the on-screen
menu. Press the CH(annel)
▲
/
▼
buttons to
select an item in the menu. Press the
VOL(ume)
B
/
{
buttons to adjust an item in
the menu or to advance to the next menu.
Number Buttons
Press to select channels.
• Cable Users
Enter channel numbers as a two-digit number for
the quickest results. For example, to select chan-
nel 6, press 0,6. If you only press the Number 6
button, channel 6 will be selected after a brief
delay. (There also may be a brief delay when you
select channels 10, 11, and 12.) If you want to
select channels 100 and above, enter channel
numbers as a three-digit number. For example,
to select channel 117, press 1, 1, 7.
• Antenna Users
Enter channel numbers as a two-digit number for
the quickest results. For example, to select chan-
nel 5, press 0,5. If you only press the Number 5
button, channel 5 will be selected after a brief
delay. You may only select channels 2-69.
MUTE Button
Press to turn OFF the sound on the TV.
Press again to restore the sound.
CH(annel)
▲
/
▼
Buttons
Press to scan through available channels.
Press to select an item in the on-screen menu.
STATUS/EXIT Button
Press to see the current channel number on the
TV screen.
Press to remove the on-screen menu. You also
may remove the menu by pressing the
CH(annel)
▲
/
▼
buttons to select EXIT, then
pressing the VOL(ume)
B
/
{
buttons. (You
may need to select EXIT repeatedly to com-
pletely remove all of the menus.)
SLEEP Button
Press to set the TV to turn itself OFF
automatically. Details are on page 5.
POWER Button
Press to turn the TV ON and OFF.
ALT. CH (Alternate Channel) Button
Press to return to the TV channel you were
viewing immediately before switching to your
current channel.
Battery
Compartment
Lid
Battery
Compartment
F
ollow these steps to quickly
add area channels into the
TV’s memory.
Note:
You can connect earphones (not supplied) to the EARPHONE
jack on the front of the TV for private, personal listening.
Press the CH(annel)
▲
/
▼
buttons to select
SETUP. Then, press the
VOL(ume)
B
or
{
button
to continue.
Press the CH(annel)
▲
/
▼
buttons to select AUTO
INSTALL. Then, press the
VOL(ume)
B
or
{
button to
enter AUTO INSTALL, which
will set up the channels.
When setup is complete, the
SETUP menu will appear for a
moment, then the lowest stored
channel will appear. Now, when
you press the CH(annel)
▲
/
▼
buttons, you will only scan
through channels that are
available. You still may select
non-memorized channels by
pressing the Number buttons.
Press the MENU button
to display the TV’s on-screen
menu.
Press the CHANNEL
▲
/
▼
buttons to select an item in the
menu.
Press the VOLUME
▲
/
▼
but-
tons to adjust an item in the
menu or to advance to the next
menu.
Note: To remove the menu,
press the CHANNEL
▲
/
▼
but-
tons to select EXIT. Then, press
the VOLUME
▲
or
▼
button.
(You may need to select EXIT
repeatedly to completely remove
all of the menus.)
Or, press the MENU button,
repeatedly if necessary, to
remove the MENU.
Press the POWER
button to turn ON the TV.
Press the MENU but-
ton. The main menu appears
on the TV screen.
Remote Sensor
Point the remote
control here when
using the remote
to work the TV.
VOL(ume)
B
/
{
Buttons
Press to adjust the TV sound level. Press to
adjust an item in the on-screen menu or to
advance to the next menu.
If you press the VOL(ume)
{
button when
the sound is muted, the volume bar will
appear on the screen. Pressing the
VOL(ume)
B
button when the sound is
muted will restore the sound.
EXIT
B
LANGUAGE
ENG
AUTO INSTALL
B
CHANNEL EDIT
B
AUTO STORE
31
CC (Closed Caption) Button
Press repeatedly to select a Closed Caption
mode. Details are on page 7.
SETUP
B
EXIT
B
BRIGHTNESS
24
COLOR
31
PICTURE
31