8
3.3.2 Pair up with the subwoofer
The wireless subwoofer automatically pairs
up with the SoundBar for wireless connection
when you turn on the SoundBar and the
subwoofer.
If no audio from the wireless subwoofer can be
heard, manually pair up the subwoofer.
1
Turn on the SoundBar and the subwoofer.
• if the connection to the SoundBar is
lost, the indicator on the subwoofer
blinks white slowly.
2
Press the
CONNECT
button on the
subwoofer to enter the pairing mode.
• The indicator on the subwoofer blinks
white quickly.
3
On your remote control, press
AUX
button, then long Press
PAIR
button for 3
seconds.
• All the indicators on the front panel of
main unit blink back and forth.
• The LED on subwoofer will blinks
quickly during paring.
4
If the paring succeeds, the indicators will
show as below.
• The five indicators on the front panel
of main unit light up for two seconds,
then light off.
• The indicator on the subwoofer will
stop blink and stay on white
.
5
If the pairing fails, repeat the steps 1 to 3.
• The five indictors on the front panel of
main unit blink twice.
• the indicator on the subwoofer blinks
white slowly.
4 Connect and set
up
This section helps you connect your SoundBar
to a TV and other devices, and then set it up.
For information about the basic connections of
your SoundBar and accessories, see the quick
start guide.
Note
•
For identification and supply ratings, see the type plate
at the back or bottom of the product.
•
Before you make or change any connections, make sure
that all devices are disconnected from the power outlet.
4.1 Position the SoundBar.
Place the subwoofer at least 1 meter (3 feet)
away from your SoundBar, and ten centimeters
away from the wall.
For best results, place your subwoofer as shown
below.
Soundbar MSB4560_DFU_20140522.indd 8
2014/5/22 04:45:47
