Magnavox MRU4100, Руководство пользователя

Страница: 2 / 8

5 4
Direct Code Entry
1. Press and hold the CODE SEARCH button until the
red indicator stays on, then release the CODE
SEARCH button.
2. Enter the 4 digit code from the code table. Note:
after a valid code entry, the red indicator turns off.
For an invalid code, the red indicator flashes.
3. With your device on, press CHANNEL UP . If the
device responds, no further programming is
required. Note: If some buttons do not operate your
equipment, try one of the other codes for your
brand.
Code Entry
Write your code down here for easy reference later.
Code
Some buttons on the remote might have functions that
are referred to by different names on the device you are
controlling. E.G.
PREV CHAN may be called RECALL,
or ENTER may be called DISPLAY. These differences
depend on the brand and model of your product. Also,
this remote can only operate features that exist on your
product. E.G., your product must have
PREV CHAN
ability for the PREV CHAN button to operate this
feature.
Button Functions
CHAN+
MUTE
VOL
+
CC
1 2 3
4 5 6
7 8 9
ENTER SLEEP
0
VOLUME UP/
DOWN
Changes
the volume level of
the product,
normally the TV.
CHANNEL UP/
DOWN
Changes the
channels.
PREV CHAN
Returns to the
previously selected
channel.
SLEEP Turns off the
TV after a period of 1
to 99 minutes.
ENTER
Used after direct
channel number
entry to immediately
change to the
selected channel.
NUMBERS
Enter numbers for direct
channel selection. Some
products require Enter to
be pressed after channel
selection.
MUTE Turns off the
TV sound while the
picture remains.
Red Indicator
Lights when
any button is
pressed.
CC (Closed Caption)
TV Closed Caption
(if your TV has this
feature).
CODE
SEARCH
Used for setup
Programming with Code Search
If your TV does not respond after you have tried all the
codes for your brand, or if your brand is not listed, try
searching for your code by following the steps below.
1. Manually turn on the TV to be controlled.
2. Press and hold the
CODE SEARCH button until the
red indicator stays on, then release the CODE
SEARCH button.
3. Press the CHANNEL UP button repeatedly (up to
300 times) until the device to be controlled changes
channel. The red indicator blinks off with each
button press. If you accidentally overshoot the
code required, press the
CHANNEL DOWN button
to backtrack through the library until the device
changes channel. Pressing
CHANNEL UP changes
direction to forward again.
4. Press and release MUTE to install the code.
Note : Code Search starts from the currently stored 4
digit number.
MRU4100-OM(MX010)_H14112A.pmd 10/12/2007, 3:47 PM 4-5