During first time use, slide the insulation film out from the battery tray and
discard it as illustrated to the right:
When the battery is consumed, replace the battery as shown below:
1. Push the tap on the battery tray and slide it out as the illustrated below:
2. Install a new CR 2025 button cell to the battery tray as the polarity makings
on the rear of remote cabinet.
3. Close the battery tray.
BATTERY PRECAUTIONS:
Follow these precautions when using the battery in this device:
Remarks:
● When there is an obstacle between the unit and
the transmitter, the transmitter may not operate.
● When direct sunlight, an incandescent lamp,
fluorescent lamp or any other strong light shines
on the REMOTE SENSOR of the unit, the remote
operation may be unstable.
Fig.1
Fig.2
Fig.3
7
Remote Sensor
This product contains a coin/button cell battery. If the coin/button cell battery is
swallowed, it can cause severe internal burn in just 2 hours and can lead to
death.
Keep new and used batteries away from children. If the battery compartment does not
close securely, stop using the product and keep it away from children.
If you think batteries might have been swallowed or placed inside any part of the body,
seek immediate medical attention
8.
Approx.12 feet
°
°
BATTERY INSTALLATION (Remote Control)
1. Use only the size and type of battery specified.
2. Be sure to follow the correct polarity when installing the battery as indicated in the battery
compartment. A reversed battery may cause damage to the device.
the batteries to prevent damage or injury from possible battery leakage.
5. Do not try to recharge the battery not intended to be recharged; it can overheat and rupture.
(Follow battery manufacturer’s instructions.)
6. Do not dispose of battery in fire. Battery may explodes or leak.
7. Clean the battery contacts and also those of the device prior to battery installation.
3. Do not mix different types of batteries together (e.g. Alkaline and Carbon-zinc) or old batteries
with fresh ones.
4. If the batteries in the device are consumed or the device is not to be used for a long period of
time, remove
EFFECTIVE DISTANCE OF REMOTE TRANSMITTER
