16
2.
Power on the unit as previously instructed.
3.
The unit will automatically play the first track on the SD CARD Device.
4.
During playback:
Press the
►
II/SCAN Button on the unit or Remote Control to pause, press
again to resume normal playback.
Short Press the I
◄◄
or
►►
I buttons repeatedly to skip tracks.
Long Press the I
◄◄
or
►►
I buttons to search the specific section .
Use the Numeric & 10+ buttons on the Remote Control to select and plays
the desired tracks. For examples:
To play the 4th track on the USB device, press the “4” Button. “0004”
will appear on the display then the unit will start to play it.
To play the 14th track on the USB device, press the “4” + “10+”
buttons. “0014” will appear on the display then the unit will start to
play it.
Connect guitar:
The guitar can be used in any operating mode. To connect the guitar, proceed as
follows:
-Insert the connection cord (6.3 mm cinch) for the guitar into the guitar plug GT IN as
illustrated below:
-Connect the guitar with the connection cord. Use the MIC/GT.VOL knob to select the
desired guitar volume.
