EN
EN-51
■
■
Network■Update
You can update the software by connecting the unit to the Internet.
1. Follow steps 1 to 3 in “Disc / SD Memory Card Update” on page 50.
2. Use
[
Î
/
ï
]
to select “Network”, then press
[OK]
.
3. Use
[
Í
/
Æ
]
to select “Yes”, then press
[OK]
.
• This unit will then start checking for the latest software version.
4. Confirmation message will appear. Select “Yes”, then press
[OK]
.
5. The unit will restart automatically, then software update will start.
• The unit will start downloading the latest software version.
6. When the download completes, confirmation message will appear. Press
[OK]
.
• The unit will start updating the software version.
• It may take a while to complete the updating.
7. After updating finishes, this unit will restart automatically.
C
Caution
• Please do not unplug the AC power cord, LAN cable or press
[STANDBY/ON
.
]
to turn the unit into
standby mode while executing the “Network Update”.
D
Note
• In order to update the software via the Internet, you must connect the unit to the Internet and set up necessary
settings.
• For the network connection, refer to “Connection to the Network” on page 16.
• For the network setup, refer to “Network Connection” on page 41.
• All settings will remain the same even if you update the software version.
• The version of Netflix will also be updated if a newer version of Netflix is available when updating the software.
