1. Manually turn on the TV to be controlled.
2. Press and hold the Power and Mute buttons until the red indicator remains on.
3. Release the buttons.
4. Press the Power button to begin code search.
5. Press the Channel Up (CH+) button (or Power button) repeatedly until the TV changes
channel (or turns off). You might have to press the button 100 times or more to find
your code. If you accidentally overshoot the code required, press the Channel Down
(CH-) button, to backtrack through the code library until the TV changes channel.
5.
Press and release Mute to save the code. Code search is now complete. Note:
Code search starts from the currently stored three-digit number. For example if
there are 100 codes in the library and the currently stored code is 050 then the
Code Search starts from 051 continuing to 100 before looping back to 000 and
finishing at 050.
Code Identificaton:
To determine the code installed in the remote:
1. Press and hold Power and Mute at the same time until the red indicator remains on.
Release buttons.
2. Press and release the Channel Down (CH-) button. The red indicator blinks off once to
indicate keypress acceptance.
3. To find the first digit press the V- button and count the red indicator blinks. To find
the second digit, press the CH+ button and count the blinks. To find the third digit,
press the V+ button and count the blinks. The red indicator remains off after the last
blink. Note: No blink indicates a "0" digit.
Code Identification is now complete.
Battery Saver: If the remote accidentally gets stuck down the back of the couch with a
button pressed it will stop transmitting after about 30 seconds so as not to drain the
battery.
Code Saver: When changing batteries have the new batteries handy before removing
the old ones. If the remote has no batteries installed for more than about 10 minutes
you will lose the installed code.
OPERATION
1.
Press Power to turn your TV on and off.
2.
Press Channel Up (CH+) and Channel Down (CH-) to change channels.
3.
Press Volume Up (V+) and Volume Down (V-) to Adjust the volume of your Tv.
4.
Press Mute to silence your TV.
Code List
