Magnavox CT202MW8, Руководство по обслуживанию, Страница: 23 / 89

1-7-2 P7753EA
2. Setting for CONTRAST, COLOR,
TINT, V-TINT and SHARPNESS
Data Values
<TV mode (Composite block)>
1. Enter Service mode in TV mode.
2. Press [PICTURE] button on the service remote
control unit. Display changes “BRT,” “CNT,” “COL,”
“TNT,” “V-T,” and “SHP” cyclically when [1] button is
pressed.
CONTRAST (CNT)
1. Press [1] button to selcet “CONTRAST (CNT)”
display.
2. Press [CH.
o
/
p
] buttons so that the value of
“CONTRAST (CNT)” becomes “80”.
COLOR (COL)
1. Press [1] button to select “COLOR (COL)” display.
2. Press [CH.
o
/
p
] buttons so that the value of
“COLOR (COL)” becomes “58”.
TINT (TNT)
1. Press [1] button to select “TINT (TNT)” display.
2. Press [CH.
o
/
p
] buttons so that the value of
“TINT (TNT)” becomes “56”.
V-TINT (V-T)
1. Press [1] button to select “V-TINT (V-T)” display.
2. Press [CH.
o
/
p
] buttons so that the value of “V-
TINT (V-T)” becomes “50”.
SHARPNESS (SHP)
1. Press [1] button to select “SHARPNESS (SHP)”
display.
2. Press [CH.
o
/
p
] buttons so that the value of
“SHARPNESS (SHP)” becomes “43”.
Note: BRIGHT data value does not need to be
adjusted because this setting is performed in
other setting.
<DVD mode (Y-C block)>
1. Enter Service mode in DVD mode.
2. Press [PICTURE] button on the service remote
control unit. Display changes “YC-BRT,” “YC-CNT,”
“YC-COL,” “YC-TNT,” and “YC-SHP” cyclically
when [2] button is pressed.
YC-CONTRAST (YC-CNT)
1. Press [2] button to selcet “YC-CONTRAST (YC-
CNT)” display.
2. Press [CH.
o
/
p
] buttons so that the value of “YC-
CONTRAST (YC-CNT)” becomes “75”.
YC-COLOR (YC-COL)
1. Press [2] button to select “YC-COLOR (YC-COL)”
display.
2. Press [CH.
o
/
p
] buttons so that the value of “YC-
COLOR (YC-COL)” becomes “70”.
YC-TINT (YC-TNT)
1. Press [2] button to select “YC-TINT (YC-TNT)”
display.
2. Press [CH.
o
/
p
] buttons so that the value of “YC-
TINT (YC-TNT)” becomes “50”.
YC-SHARPNESS (YC-SHP)
1. Press [2] button to select “YC-SHARPNESS (YC-
SHP)” display.
2. Press [CH.
o
/
p
] buttons so that the value of “YC-
SHARPNESS (YC-SHP)” becomes “37”.
<DTV mode (YUV block)>
1. Enter Service mode in DTV mode.
2. Press [PICTURE] button on the service remote
control unit. Display changes “YUV-BRT,” “YUV-
CNT,” “YUV-COL,” “YUV-TNT,” and “YUV-SHP”
cyclically when [3] button is pressed.
YUV-CONTRAST (YUV-CNT)
1. Press [3] button to selcet “YUV-CONTRAST (YUV-
CNT)” display.
2. Press [CH.
o
/
p
] buttons so that the value of
“YUV-CONTRAST (YUV-CNT)” becomes “80”.
YUV-COLOR (YUV-COL)
1. Press [3] button to select “YUV-COLOR (YUV-
COL)” display.
2. Press [CH.
o
/
p
] buttons so that the value of
“YUV-COLOR (YUV-COL)” becomes “58”.
YUV-TINT (YUV-TNT)
1. Press [3] button to select “YUV-TINT (YUV-TNT)”
display.
2. Press [CH.
o
/
p
] buttons so that the value of
“YUV-TINT (YUV-TNT)” becomes “64”.
YUV-SHARPNESS (YUV-SHP)
1. Press [3] button to select “YUV-SHARPNESS
(YUV-SHP)” display.
2. Press [CH.
o
/
p
] buttons so that the value of
“YUV-SHARPNESS (YUV-SHP)” becomes “45”.