Magnavox CMWC13D6, Руководство пользователя

Страница: 7 / 60

EN
7
When you watch a program recorded on another source (VCR or video camera), use the AUDIO/VIDEO input
jacks on the front of the unit.
Connect the Audio/Video output jacks of another source to the AUDIO and VIDEO jacks of this unit.
Then use [SELECT] or [CH.
K K
/
L L
] until "AUX" appears on the screen.
(Refer to "TO WATCH EXTERNAL INPUT" on page 9.)
CONNECTING TO AN EXTERNAL DEVICE (FRONT)
2 1 3
INSTALLING THE BATTERIES IN REMOTE CONTROL
1) Open the battery compartment cover by pressing
the cover on the remote unit in the direction of
the arrow.
2) Insert 2 "AA" penlight batteries into the battery
compartment in the direction indicated by the
polarity (+/-) markings.
3) Replace the cover.
[BATTERY PRECAUTIONS]
• Be sure to follow the correct polarity as indicat-
ed in the battery compartment. Reversed batter-
ies may cause damage to the device.
• Do not mix different types of batteries together
(e.g. Alkaline and Carbon-Zinc) or old batteries
with fresh ones.
• If the device is not to be used for a long period
of time, remove the batteries to prevent damage
or injury from possible battery leakage.
• Do not try to recharge batteries not intended to
be recharged; they can overheat and rupture.
PLAY STOP CH.
SELECT
STANDBY-ON
VOLUME
VIDEO AUDIO
OPEN/CLOSE
VIDEO AUDIO
OPEN/CLOSE
ex.
VCR or video camera, etc.
[Front of the unit]
To the Audio output jack
To the Video output jack
(OUT)
(IN)
(OUT)
(IN)
Audio Cable
(commercially available)
Video Cable
(commercially available)
PREP
ARA
TION FOR USE
AUX