Magnavox 39MF412B, Руководство пользователя

Страница: 13 / 38

English
13
These operations are accessible by remote control.
Some may also be accessible by control panel on the main unit.
Initial setup
Thissectionwillguideyouthroughtheunit’sinitialsettingwhich
includesselectingalanguageforyouron-screenmenuandautoprogram,
whichautomaticallyscansandmemorizesviewablechannels.
Before you begin:
Makesuretheunitisconnectedtoantennaorcable.
1
Aftermakingallthenecessaryconnections,press toTurnOnthe
unit.
• ItmaytakeafewmomentstoTurnOntheunitforthefirsttime.
•
Initial setup
menuappearsautomaticallyaftertheunitisTurned
On.
2
Use ▲▼ toselecttheon-screenlanguagefromthechoices
(English/Español/Français)ontherightsideoftheTVscreen,then
press
OK
.
3
Use
▲▼
toselect
Antenna
forTVchannelsor
Cable
forCATV
channels,thenpress
OK
.
Initial setup
Make sure the antenna is connected to ‘’ANTENNA IN’’ jack.
Select your signal source.
Antenna
Cable
Antenna
Cable
Or
ANTENNA IN
Skip
Select OK Back Skip
– When Antenna isselected,theTVdetectsantennasignals.It
searchesforDTVandAnalogTVchannelsavailableinyourarea.
– When
Cable
isselected,theTVdetectssignalssuppliedbycable.It
searchesforDTV,AnalogTVandCablechannelsavailableinyour
area.
•
Autoprogram
willbegin.
Initial setup
Please wait while the system is scanning for channels.
Auto programming may take more than 20 minutes to
complete.
0 ch
Skip
4
Use ▲▼ toselectthedesiredlocationsetting,thenpress OK .
Initial setup
Location Home is recommended for normal home use.
In the Retail Store mode, all settings are fixed.
Retail
Home
Select OK
• Select Retail ,theunitwillbesetupwithpredefinedsettingfor
retaildisplays.
• Select
Home
,theunitissettomaximizetheenergyefficiency
forhomesettinganditcanbeadjustedthroughachoiceof
pictureandsoundqualityaccordingtoyourpreference.Usethis
settingtoremovetheE-stickerifvisiblefromthedisplay.
➠
p. 27
• Whentheinitialsetupiscompleted,thelowestmemorized
channelwiththeconfirmationmessageofthelocationsetting
willbedisplayedontheTVscreen.
• Youmustset Home instep 4 .Otherwise, Picture and Sound
settingsyouadjustedwillnotbememorizedaftertheunitgoes
intoStandbymode.
Note
•
Ifyouarenotreceivingasignalfromyourcableservice,contacttheCableprovider.
•
Ifyoupress or MENU duringautoprogram,thissetupofTVchannelswillbe
canceled.
•
Theinitialautoprogramfunctioncanbeexecutedforeither
Antenna
or
Cable
only
once.Whenyouchangetheconnection(Antenna/Cable),set Autoprogram again.
➠
p. 20
•
IfthereisnosignalInputfromtheantennaterminalandnooperationforseveral
secondsafteryouTurnOntheunit,helpfulhintsappears.Followtheinstructionslisted
ontheTVscreen.
Initial setup
No channel is registered.
Try Autoprogram again?
Verify that you have a cable connected to the “ANTENNA IN” jack
on the back of the TV, the channel installation process
searches this connection. If you are using a cable or satellite
box, please confirm the input which you have connected to
the box and press “SOURCE” key on the remote control to
select the appropriate source input.
Retry
Later
Select OK Skip
After an initial setup is completed...
• Ifyouwanttoscanthechannelsautomaticallyagain.
Autoprogram
➠
p. 20
• YoucanaddthedesiredcableandAnalogchannels
unmemorizedbyautoprogram.
Add channels
➠
p. 21
• Ifyouwanttochangetoanotherlanguage.
Language
➠
p. 27
• Ifyouwanttochangethelocationsetting.
Location
➠
p. 27