9
AV3
L
AUDIO
R
HDMI
HDMI (High Definition Multimedia Interface) connector
Connect the digital HDMI output of your HD device (e.g. DVD player, Set Top Box..) to the
HDMI
connector of your TV.
Notes:
- Proper working is only guaranteed with HDMI compliant consumer products.
- Digital devices from different manufacturers have the possibility of differing output standards which may cause
difficulties for the television to properly display;
- If the set is cold, there may be a small “flicker” when the set is turned on. This is normal, there is nothing wrong
with the set.
HDMI is the leading new standard for Digital High
Definition video and audio interconnection. Eg. with a Digital
Set top box, with HDMI-equipped devices like a DVD-R, AV
receiver...
Note: The HDMI connector does
NOT
support DVI devices with
analogue audio.
The
HDMI
connector allows
- the following TV and monitor display modes:
EDTV 640/720 x 480p
720 x 576p
HDTV 1920 x1080i
VGA
640 x 480
60 Hz
SVGA 800 x 600
60 Hz
XGA
1024 x 768
60 Hz
- uncompressed HD content
- encrypted or non encrypted signals.
According to where you connected the accessory devices, press
•
AV+
followed by digit ‘
1
’ to select
AV1
•
AV+
followed by digit ‘
2
’ to select
AV2
•
AV+
followed by digit ‘
3
’ to select
REAR
for a device connected
to the rear or to the side (according to the type of TV you've
purchased), see p. 6
•
AV+
followed by digit ‘
4
’ to select
HD-A
for a HD-A device
connected to
AV3
, see p. 8
•
AV+
followed by digit ‘
4
’ again to select
HD-D
for a HD-D device
connected to
AV3
, see p. 9
•
AV+
followed by digit ‘
5
’ to select
PC-A
for a PC connected to
AV3
, see p. 8
Note: When in HD or PC mode, first press the
TV
button to return to TV
mode or to select
AV1
,
AV2
or
REAR
again.
7
8
9
0
ACTIVE
SLEEP
AUTO
AUTO
a
M
CONTROL
PIP
TIMER
SAP
AV+
-
AV+
To select connected devices
002 28-09-2004 10:35 Pagina 9
