Magnavox 20MT1336 - 20" Color Tv, Руководство пользователя, Страница: 6 / 30

6
CABLE BOX CONNECTION
I
f your cable signal uses a cable box or decoder, follow the steps below to complete the connection.
1
Connect the Cable Company supplied
cable
to the signal IN(put) plug at the back of
the Cable Box.
2
Using a separate round coaxial cable, connect
one end of the
OUT(put) to TV plug on
the back of the Cable Box.
3
Connect the other end of the round coaxial
cable to the 75 input on the back of the
television. Screw it down finger tight.
NOTE : If applicable , set the OUTPUT CHANNEL
SWITCH on the back of the cable box to
CH3 or 4. Tune the TV to the same channel
and change channels at the cable box. In
some cases, the cable box will automatically
tune to either channel 3 or 4, change channels
until the picture appears.
Ω
Cable Box (w/RF In/Outputs) :
75‰
L
R
S-VIDEO
VIDEO
AUDIO
CVI AV out
Y
Pb
Pr
AV in
75
TO
TV/VCR
CABLE
IN
IR
USB
DVD-D OUT
AUDIO IN SPDIF
VIDEO
IN OUT
S-VIDEO
R L
AUDIO OUT
TV
PASSCARD
Y Pb Pr
OPTICAL
SPDIF
1 2
3
Jack Panel Back of Cable Box
Cable Signal IN from the
Cable Company
Round 75
Ω
Coaxial Cable
Jack Panel Back of TV
Cable Box (w/RF In/Outputs):
If no Video Signal is present, the TV will shut itself
off in about 10 minutes. If the TV is tuned to the
AV channel and there are no Video Signal present,
the screen will remain black and the TV will shut
itself off in about 10 minutes.
H
ELPFUL
H
INTS