English
14
Watching channels from an external device
Switching Each Input Mode can easily switch with the remote control
between TV (DTV or Analog TV) and external devices when they are
connected to the unit.
1
Turn On a set-top box or the connected device.
• The picture from your set-top box or the connected device
might appear automatically on the TV screen.
If the picture does not appear
Press
SOURCE
repeatedly to select the set-top box or the
connected device and wait a few seconds till the picture appears.
e.g.)
Source
TV
HDMI1
HDMI2
HDMI3
Video
PC
11.1
HDMI1
HDMI2
DTV / TV channel
Video
or
Component
PC
HDMI3
• Pressing
▲
reverses the direction of the Input modes.
• The above image is an example for 26 inch and larger screen
size TVs. It may differ depending on what product you purchased.
2
Use the remote control of the set-top box or the connected device
to select channels.
Using auto mode
1
Press
AUTO MODE
to set your TV to a predefined picture and
sound setting.
2
Use
▲▼
to select one of the following settings :
Auto picture
Auto sound
Description
Personal
The customized settings you defined using
the
Picture
and
Sound
menu
Standard
For normal TV viewing
Vivid
Enhanced picture contrast, sharpness and
sound for viewing in a well-lit room
Sports
Brilliant picture settings and clear sound for
high action
Movie
Deep picture and powerful sound settings
for a cinematic experience
Game
-
Optimized for PCs and game consoles
Eco
-
Eco TV settings for low power
consumption
-
Music
Optimized for music playback
-
News
Controls picture tone and set the anchor's
voice at a comfortable volume
Sleep timer
Sleep Timer can set the unit to go into Standby mode after an
incremental period of time.
Press
SLEEP
repeatedly to change the amount of
time (increases the time by 30 minutes up to 120
minutes).
Sleep
120min.
Press
SLEEP
once to call up the display for checking the remaining time.
• To cancel sleep timer, press
SLEEP
repeatedly until
Off
is displayed.
Freeze mode
(Available for 26 inch and smaller screen size TVs)
Freeze Mode can freeze the image shown on the TV screen for 5
minutes.
Press
FREEZE
to freeze the image.
Freeze
• The sound Output will not be paused.
• To cancel freeze mode, press any buttons except .
Switching audio mode
DigitalTVoperation
1
Press
SAP
to display the currently selected
language and the number of available languages.
11.1
English 1/3
2
Press
SAP
repeatedly to cycle through the available audio languages.
Note
•
Available languages differ depending on the broadcast.
•
Other
is displayed when the audio language cannot be acquired or the acquired
languages are other than English, French or Spanish.
Analog/CableTVoperation
1
Press
SAP
to display the currently selected audio mode.
2
While receiving an MTS broadcast, press
repeatedly to cycle through the available audio
channels.
11
SAP / STEREO
e.g.)
When all audio are available
SAP
/ STEREO
SAP
/ MONO
SAP /
STEREO
STEREO
: Outputs stereo-audio
SAP
: Outputs second audio program
MONO
: Outputs mono-audio
