22
8. PLAYBACK IN THE DIRECT MODE
• Power on the speaker and the speaker will enter Direct Mode automatically.
• Or Press the SET (RESET/ WPS MODE) button for 5 secs in order to switch the speaker to direct
mode.
After about 30 seconds the White LED will flashing rapidly.
• Connect the smart device directly to the “Magnat_CS40 XX-XX-XX” open WLAN network of the
speaker.
• Select a music source on your smartphone/ tablet and then select the speaker as the medium on
which the music is to be played.
Note:
1. Playback in Party, Multizone or Multiroom mode is not available in direct mode.
2. When using direct mode, please remember to switch off the ‘Auto-Login’ and ‘Auto-Join” function
on smartphone, to avoid smartphone trying to connect with a valid network.
9. PLAYBACK FROM AN EXTERNAL AUDIO DEVICE
• Connect a 3.5mm stereo jack to the AUX-IN socket in order to play back stereo sound output from
other audio devices on the speaker. The speaker will switch automatically to AUX-IN mode and the
product status LED button will light up Orange.
• The speaker will revert back to the previous WLAN mode when there is no any audio signal input
through AUX-IN mode after 1 sec.
10. RESTORING THE FACTORY SETTINGS
• Press and hold the SET button down for about 5 seconds in order to restore the factory settings.
• The product will restart and the LED will light up Green. Then the White LED will turn solid white to
indicate that WLAN mode is active and the speaker is ready to connect to the network..
Note:
Please note that all the settings, e.g. the network WPA/ WPA2 key, will be irretrievably lost and
will need to be input again after the product has been reset.
11. RESETTING THE PRODUCT MANUALLY TO THE FACTORY SETTINGS
If the speaker no longer responds to inputs or if problems occur with the network connection, it may be
necessary to reset the product to the factory settings.
• Press the SET (RESET/ WPS MODE) button on the rear of the product and hold it down for more than
5 seconds.
Note:
All existing network information will have been deleted and will have to be re-entered to establish
a network connection.
12. SOFTWARE UPDATE
You can use the app to update the software of the speaker. The app searches for software updates
and, if one is available, it downloads it from the internet onto the speaker.
