Page 19
D) VIDEO SETUP
The VIDEO SETUP options are illustrated below:
z
COMPONENT
CVBS
: Choose this setting when your DVD player is
connected to your TV via the normal RCA or S-Video
output.
YUV
: Choose this setting when your DVD player is
connected to your TV via the COMPONENT output -
YUV.
RGB
: Choose this setting when your DVD player is
connected to your TV via the COMPONENT output -
RGB.
Warning
: If you are not sure about the connection,
please always select the CVBS. Otherwise, the output
screen to the TV/Monitor will be blank.
If you have wrongly selected the video output type
and you have a blank screen on your TV/Monitor
,
please press the RESET button on the remote control to
restore all the settings to the pre-factory settings –
CVBS.
z
TV MODE
P-Scan
: Choose this setting when your DVD player is
connected to your TV via the COMPONENT output –
YUV or RGB and your TV type should be Progressive
Scan type.
Interlace
: Choose this setting when your DVD player is
connected to your TV via the COMPONENT output –
YUV or RGB and your TV type should be normal
interlace type.
Warning
: If you are not sure about the connection,
please always select INTERLACE. Otherwise, the
picture output to the TV/Monitor will be distorted.
If you have wrongly selected and you got the
distorted picture on your TV/Monitor
, please press the
RESET button on the remote control to restore all the
settings to the pre-factory settings – INTERLACE.
Note
:
This setting is only selectable as long as you have
selected YUV or RGB from the Component setup
sub-menu
.