3. Pairing with Bluetooth devices
1) How to enter pairing mode
Function
Operation
LED
indicator
Indication
tone
Entering
pairing
mode
Ensure the receiver is
turned off, otherwise turn
it off first and then press
and hold MFB button for
6
～
7 seconds .
White LED is
on for 1
second and
off for 1
second.
pairing
Remark:
The pairing mode will last 2 minutes, the receiver will switch to
standby mode automatically if no devices can be connected over 2 minutes.
2)
Pairing with Bluetooth cell phone
Prior to using the BA21 for the first time, you have to pair it with a
Bluetooth-enabled cell phone. The general pairing procedures are as
follows:
1)
Place the BA21 and Bluetooth cell phone where they are easily viewable
by no more than 1 meter;
2)
Make the receiver enter pairing mode (please refer to “How to enter
pairing mode);
3)
Activate your cell phone’s Bluetooth function and set your cell phone to
search for Bluetooth devices within range, and select “BA21” from
the list of devices shown. After successful connecting, white LED of
receiver flashes twice every 4 seconds.
Remarks:
After successful pairing, the BA21 and the mobile phone will remember
each other, they will no need to re-pair next time. Every time the
receiver is turned on, it will connect to the last connected devices
automatically.
Every time the receiver is turned on, and if it doesn’t connect to any
devices, short press MFB button once, the receiver will connect to the
last connected device.
When the receiver and the mobile phone are out of effective range to
disconnected, they can connect to each other automatically once going
back to effective range.
3
