6
USB Operation
Selecting USB Audio Play Source:
When a USB device is inserted into the unit, the
unit will automatically switch to USB mode and
play files off of the inserted device. If the USB
device is left inserted any other audio source
button can be pushed to navigate to other modes
or also returned to by pushing the USB button.
USB File Selection:
Short press the
/
button to skip to
next / previous audio track. File information will
automatically appear in the display.
Press and hold the
/
button to fast
forward or reverse through a selected track.
DIR+ / DIR-:
Press the DIR+ / DIR- button to play
next / previous folder from the USB device.
Pausing the Audio:
Press the
button to pause the audio file.
Press again to resume playback.
Intro:
Press the INT button to play the first 10 seconds
of each file. Press again to stop this function.
Repeat:
Press the RPT button to repeat a single track or
to repeat an entire playlist.
Random:
Press the RDM button to play files from a
playlist in random order.
Specific Track Number:
Press the USB button to display NUM 0000.
Press the VOL +/- buttons or directly enter
desired track number.
To enter specific track number
using radio buttons press:
Buttons 1-6
EQ button = 7
button = 8
button = 9
DISP button = 0
Radio Operations
Radio Settings: Press and hold SEL button to
access radio settings, then short press the
SEL to select between the below listed setting
options. Press the + and - buttons to make
your selections (ON / OFF, up or
down levels):
P-VOL- Radio's default volume level.
AREA- USA, EUR.
DX/LOC- Distant / Local. Effects seek and scan
sensitivity and ability to lock into either distant
weak signal stations or local strong signal
stations.
STEREO/MONO- Multiple separated stereo
sound or single channel sound.
CT SYNC / INDEX:
CT SYNC:
When receiving an RDS station, the
clock will be synchronized to the station's time.
CT INDEP:
The clock will run independently,
not synchronized to the station's time. This is
the default setting.
Receive a Radio Station:
• Press the AM/FM button to select RADIO mode.
• Press the AM/FM button to select between
AM 1 or 2 (KHz) or FM 1, 2 or 3 (MHz).
• Short presses of
or
will seek to the
nearest reachable radio frequency. Long press-
es will allow you to manually find a station.
Manually Storing and Recalling Stations:
• Tune into desired station and press and hold
one of the preset buttons (1-6) for 2 seconds.
The current station will be stored into that
number buttons memory and then can be
recalled with a short press of that button.
Auto Storing Stations:
• Press and hold the AM/FM button for 2 seconds
to auto scan and store AM 1, 2 and FM 1, 2 and
3 stations into numeric buttons 1-6.
Note: When the MHz (FM) band is selected the
18 strongest stations will be stored. When KHz
(AM) band is selected the 12 strongest stations
will be stored.
Содержание RV6200S
Страница 15: ......
