manualshive.com logo in svg

Magnadyne M4-LCD, Руководство по эксплуатации и установке, Страница: 3 / 56

Поделиться
Скачать
Magnadyne M4-LCD Скачать руководство пользователя страница 3

3

 Warnings

• The driver should neither watch the display nor operate 

the system while driving. 

Watching the display or operating the system will distract 

the driver from looking ahead of the vehicle and can cause 

accidents.  Always stop the vehicle in a safe location 
and use the parking brake before watching the display 
or operating the system. In some states and countries, 

passengers are also prohibited from watching the display.

• Never install the product in a location where it interferes 

with your field of vision.

• This unit has a cooling fan to decrease the internal tem-

perature. Do not mount the unit in a place where the cool-

ing fan on the unit is blocked. Blocking these openings will 

inhibit the cooling of the internal temperature and result in 

damage to the unit.

•  Use  the  proper  power  supply.  This  product  is  designed 

for operation with a negative grounded 12V DC battery 

system. Never operate this product with other battery 

systems, especially a 24V DC battery system. If the prod-

uct is used with the improper system it may cause a fire 

or an accident.

• This product must be installed and used in accordance 

with this manual. Any alterations to this product that 
enables it to be used in any way other than intended 
or designed could distract the driver and result in an 
accident causing injury or death. Magnadyne Corporation 
disclaims any and all liability that may result from failure 
to install and operate in any other manner in which this 
unit was intended.

• FCC REGULATIONS STATE THAT ANY 

UNAUTHORIZED CHANGES OR MODIFICATIONS 

TO THIS EQUIPMENT MAY VOID THE USER’S 

AUTHORITY TO OPERATE IT.

•  TO  REDUCE  THE  RISK  OF  FIRE  OR  ELECTRIC 

SHOCK, DO NOT EXPOSE THIS EQUIPMENT TO 

RAIN OR MOISTURE.

•  THIS  DEVICE  IS  INTENDED  FOR  CONTINUOUS 

OPERATION.

•  TO  REDUCE  THE  RISK  OF  FIRE  OR  ELECTRIC 

SHOCK  AND  ANNOYING  INTERFERENCE,  USE 

ONLY THE RECOMMENDED ACCESSORIES.

 Caution

•  Do not disassemble, modify the unit or attempt to repair 

the product yourself. If the product needs to be repaired, 

consult your dealer.

• Do not install the unit in a place exposed to direct sunlight 

or excessive heat or humidity. Avoid places with too much 

dust or the possibility of water splashing.

• Backing Up Your Vehicle

Do not backup your vehicle while looking at the monitor. 
Always look in the direction of your vehicle’s motion. 
Use the monitor only as an aid in safety confirmation. 

The actual distance may be different than it appears in the 

monitor. The range of the image in the monitor is limited. 

Always be aware that blind spots may exist and not appear 

at all times on your monitor.

The product is intended to assist in safe driving and 
allows the driver to have a broader field of vision dur-
ing backup. You, as the driver, are solely responsible 
for the safe operation of your vehicle and the safety of 
your passengers and pedestrians, and abiding all state 
and local traffic regulations. Do not use any features 
of this system to the extent it distracts you from safe 
driving. Your first priority while driving should always 
be the safe operation of your vehicle. Magnadyne will 
not accept any responsibility whatsoever for accidents 
and/or injuries resulting from failure to observe these 
precautions or safety instructions.

 Liquid Crystal Panel

• Any harsh impacts may damage the liquid crystal panel.

•  Usage  temperature  range:  32

0

F to 104

0

F. When the 

temperature is very cold or very hot, the image may not 

appear clearly or may move slowly. Also, movement of the 

image may seem to be out of synchronization or the image 

quality may decline in such environments. Note that this is 

not a malfunction or problem.

• Sudden changes in the temperature inside the vehicle such 

as those which occur immediately after the vehicle’s air 

conditioner or heater has been turned on may cause the 

inside of the liquid crystal panel to cloud over due to water 

vapor or it may cause condensation (droplets of water) to 

form and, as a result, the panel may not work properly. 

Do not use the unit while these symptoms are evident. 

Instead, leave the unit standing for about an hour, and 

then resume or start use.

• If the screen of this unit is dirty, wipe the dirt off with a 

cloth moistened with a mild cleaner. Note: Applying spray 

cleaner directly to the unit may affect its mechanical parts 

or cause an electrical shock. Wiping the screen with an 

abrasive cloth or using a volatile liquid such as thinner or 

alcohol may scratch or damage the surface of the screen. 

Содержание M4-LCD

























































Отзывы:

Нет отзывов