
59
The LCD display may fail to function normally
due to the vehicle’s battery condition, and could
require restarting the radio’s microprocessor if:
• The vehicle has been “jump started” from a
dead battery condition.
• The vehicle battery becomes very low and is
quick-charged.
• The vehicle battery is removed and replaced.
Should any of these conditions occur, simply
press and release the restart button on the radio
front panel using the tip of a ball point pen. This
will restart the radio’s microprocessor. After
pressing the restart button, you should recheck
to see if the radio functions normally.
Restart Button
If the fuse should blow, check that the wiring is
correct. If the wiring is correct, replace the fuse
with the same amperage rating as the original
(15 amp).
Replaceable Fuse
15 Amp
Replaceable Fuse
MIC
RES
NAV
In the event your entertainment center ever
needs to be rebooted for any reason (for exam-
ple an error message on the screen) the reboot-
ing process is similar to that on your personal
computer.
To Reboot the System:
1. Press and hold the power button ( ).
2. Keep holding down the power button while
the screen turns off and reappears (this only
takes about 10 seconds).
3. Release the power button ( ). Your system
and settings have been rebooted and will
function normally.
Rebooting the System
Hold
MIC
RES
NAV