Magnadyne M2080, Инструкция по установке и эксплуатации

Страница: 10 / 12

10
The tape head should be cleaned regularly, especially when the
playback sound begins to deteriorate. Insert a special head cleaning
cassette into the tape mechanism and allow it to run for a few minutes.
If you are playing pre-recorded tape, your tape head should be cleaned
every 10-15 hours of playing time. If you record your own tapes and are
using good quality high bias tape, (chrome or metal type) cleaning
should be performed once a month as high quality tape will not
deteriorate and leave deposits on the tape head as will pour quality
pre-recorded tapes.
Your M2080 will play C-30, C-48, C-60 and C-90 tapes. Avoid playing C-
120 or larger length tapes. These longer tapes create unwanted loads
on the tape motor and belts causing pre-mature wear. Also, C-120 tape
is thinner and prone to tangle inside the cassette mechanism, no
matter how clean you keep your heads.
Before inserting a cassette into the unit, look through the cassette
window to make sure there is no excess slack, loose turns, and if
necessary, insert a pencil or similar object into the hub reel as shown
below and rotate to take up the slack. Fuse Replacement
Replace the fuse with only the specified size indicated below.
Fuse for main power wire (Red wire) 3.0 Amp
Cautions and Maintenance
Loose Tape
M2080 English 08/04/00 7:52 AM Page 10