5
Recalling Radio Stations (Presets):
Press PRESET button (18) to recall the preset radio stations.
The radio stations will be recalled in the order they were
memorized.
Graphic Equalizer Operation:
Press the EQ button (3) to activate the preset equalizer levels.
Repeated pressing of the EQ button will select: Classic,
Rock, Pop or normal in this sequence. Press the button as
many times as needed to select the desired EQ setting.
Display Mode Operation:
Pressing the MODE button (4) while displaying the radio
frequency will switch the display from radio frequency to
time for approximately 5 seconds then return to radio
frequency. Continuously pressing the button will display
in sequence: Time, Timer On, Timer Off and radio frequency.
See "Alarm Operation" for more details.
RADIO OPERATION
SETTING THE CLOCK
1.
Press the PWR button (1) to turn the unit on.
2.
Press the TUNER button (11) to select radio operation.
3.
Press the MODE button (4) to display the clock in the LCD
digital information area.
4.
Within 5 seconds press the MEMORY/CLOCK SET button
(16) the "hour" will start flashing.
5.
Press either the Skip Down button (8) or Skip Up button
(9) to select the desired hour. When selecting hour note
the AM or PM indicator in the Digital Information Center.
6.
Press the MEMORY/CLOCK SET button (16) again and the
"minutes" will start flashing.
7.
Press either the Skip Down button (8) or Skip Up button
(9) to select the desired minutes.
8.
Press the MEMORY/CLOCK SET button (16) one more time
to exit clock setting mode.
SETTING THE SLEEP TIMER
1.
Press the PWR button (1) to turn the unit on.
2.
Press and hold the SLEEP button (20) until the desired sleep
time is displayed (90, 80, 70, 60, 50, 40, 30, 20, 10 minutes).
3.
After the sleep timer has expired the unit will automatically
turn off.
Note:
You must reset the sleep timer every time you turn the
unit on.
AM
MHz
CH
STEREO
FM
MEMORY
CLASSIC
EQ Setting
AM Indicator
SLEEP
Sleep Timer
Minutes
LS4500 ManualFNL2 5/4/04 3:00 PM Page 5
