5
General Operations
Setting the Clock
1. Press DISP button (13) for more than 3 seconds
until the clock shown in the display area is flashing.
2. Press the
button to adjust the hours
3. Press the
button to adjust the minutes.
Display Priority
Clock Display Priority
Press and hold DISP button (13) while pressing
the
button to select Clock Priority. Pressing the
DISP button while in Clock Priority will temporari-
ly display selected station frequency.
In CD Mode:
When the display priority is set to "Clock", the
clock will be displayed.
Pressing DISP button will temporarily display CD
track number, time remaining or elapsed time
depending on current CD display option selected.
After 5 seconds the display will return to the clock.
Frequency Display Priority
Press and hold DISP button while pressing the
button to select Frequency Priority. Pressing
DISP button while in Frequency Priority will tem-
porarily display clock.
In CD Mode:
When the display priority is set to "Frequency",
the CD track number will be displayed.
Pressing the DISP button will temporarily display
the clock. After 5 seconds the display will return
to the CD display.
Selecting a Mode
Press the MODE button (17) to step sequentially
through the following sources: Radio Mode to
Radio Tuner > CD > CD Changer (optional) >
Auxiliary > Radio Tuner.
Illumination Dimmer
Press LOUD / DIMMER button (15) for more than
2 seconds to adjust the brightness of the LCD
display backlight.
Reset Button (21)
The Reset Button (21) is located behind the CD
Door, and above the CD Slot. Activated the reset
button with either a ballpoint pen tip or paper clip
for the following reasons:
• After initial installation of the unit is com-
pleted.
• When the function buttons do not operate.
• Error symbol in the display.
If there is a disc in the slot when the reset but-
ton is pressed the disc will be ejected.
CD Changer Operation (Optional)
Select a Disc
1. Load your CD Changer with compact discs per
the manufacturer's operating instructions.
2. Press the
SHIFT button (4) to enter Shift
Mode. “SHIFT” will then appear in the display,
indicating the CD Changer is active.
3. Press the
or
button to scroll through the
CDs loaded in the CD Changer. If there isn’t any
operation for several seconds, the unit will exit
Shift Mode automatically.
Notes on CD-Rs and CD-RWs:
• The unit cannot play a CD-R and CD-RW that is
not finalized. (Please refer to the manual of your
CD-R/CD-RW recorder or CD-R/CD-RW software
for more information on the finalizing process).
• This unit will not play MP3 music or WMA music
recorded on any CD-R or CD-RW disc.
• Be sure to only use discs with the following labels
in this unit:
SCAN
