Magna Telemotive blue PiraT Remote, Руководство пользователя

Страница: 50 / 82

Remote Control Touch / blue PiraT Re-
mote
User Guide
Datum:14.12.2018
Seite 50 von 82
RCTouch_UserGuide_V3.4.1.doc
6.3.1 Device status
The device status may display the following messages:
Message Form Meaning Data recording
ERROR red flashing device in error mode jeopardized
FWUPDATE
dark blue flashing logger firmware is updated stopped
MEMORY dark blue flashing lack of memory capacity jeopardized
OK dark blue normal operation normal
RING dark blue flashing logger in ring buffer mode normal
WARNING
dark blue flashing jeopardized operation normal
Table 6.5: Device status messages
More information on the device status in provided in the user guides of the data loggers, section
Memory space and level.
6.3.1.1 Memory full
If the memory of a connected logger is full, this will displayed as a flashing [MEMORY in the
Status / Overview
If the memory of a connected logger full, this will display a flashing [MEMORY] appears in the
Status / Overview display.
Figure 6.33: Memory full note in the Status / overview display